Arhiva Metal processing – Metal Cutting Service Center

Laser cutting of pipes and profiles

17. September 2021.

Laser cutting of pipes and profiles differs greatly from a conventional cutting of plates and sheets. The main differences relate to problems that can arise through negligence and not adjusting the cut parameters. What should you be careful about? (more…)

Plasma cutting – procedures and techniques

12. August 2021.

Today, on the market, there are several different plasma cutting procedures that give a different cut quality. Each procedure has a characteristic application. Which procedures are used for what? (more…)

Laser cutting quality control

9. July 2021.

Quality control is a must in all processes, so the process of laser cutting is no exception. The ISO 9013: 2002 standard defines the parameters or requirements that are set for laser cutting. What are the parameters and why they are important?

(more…)

Reflective metals laser cutting

17. August 2018.

Reflective metals laser cutting is accessed with special care due to possible damage to the lens system. For this reason, special systems and techniques that don’t diminish the precision of the cut have been developed. Which are these techniques? (more…)

Three key factors for good quality laser cutting

2. July 2018.

Before laser cutting begins, a few questions have to be asked, to answer the question about the possible quality after the cutting process is completed. We bring you the advice of one of the renowned experts in the area of laser metal cutting. (more…)

Laser Cutting Head And Optics Are The Key To Laser Cutting Success

6. June 2018.

The innovations and the technological development of laser optics or laser cutter heads have greatly contributed to the development and the improvement of the laser cutting quality. Operator interventions in the laser cutting process are becoming less necessary, and the emphasis is placed on the complete cutting automatization, which can be achieved through the latest innovations in this technology. (more…)

Metal Cutting Techniques Overview

15. May 2018.

Along with the increasing demand for metal cutting, new cutting technologies are being developed; which are more precise and more economical. When it comes to metal processing techniques used nowadays; the most common ones are laser cutting, plasma cutting, or water jet cutting. (more…)

CNC Technology And Metal Processing

8. May 2018.

CNC (Computer Numeric Control) machines are automated tools that are controlled by programmed commands modeled with a computer that also plays an important role in managing them. (more…)

Sheet Bending Principles

17. April 2018.

Sheet bending is a process of metalworking without removing the saw, whereby the inner part of the transverse section is shortened and pressurized, while the outer part is prolonged and under tensile stress. (more…)

Laser metal cutting – Key advantages and characteristics

5. April 2018.

Today’s technology enables sophisticated metalworking processes, whether cutting, welding or other operations. One of the most modern processing methods, in other words, metal cutting methods, is laser metal cutting. (more…)

Monday - Friday:	07:00 - 15:00
Saturday:	Closed
Sunday:	Closed
Collective vacation:	From July 29th to August 9th 2024.